Programming Basics

Additional Feature Information
Account Codes
Programming for this Feature
Programming Forced Account Codes
Programming Verified Account Codes
Programming Example 1: Restrict 900 and 1 + 900
Programming Example 2: Allow 800 and 1 + 800

Basic Account Code Programming

1. Set up some general Account Code options.

  1. 1551-02: Allow Account Codes in Speed Dial Bins [System: Options: Setup: Account Codes (1551): Allow in Speed Dial Number]
    - This allows users to store Account Codes in Speed Dial numbers. The numbers can contain both the Account Code and the outside number.
    Option Description
    No (0) [Default] Disabled.
    Yes (1) Enabled.
  2. 1551-01: Dial # to Enter Account Codes [System: Options: Setup: Account Codes (1551): # Key to Enter Account Codes]
    - If enabled, a user on an outside call can dial # to enter an Account Code. This is the only way single line users can optionally enter Account Codes.
    Option Description
    No (0) [Default] Disabled.
    Yes (1) Enabled.
  3. 1551-03: Show Account Codes on Telephone Display [System: Options: Setup: Account Codes (1551): View Account Codes]
    - Use this option to mask Account Codes on the telephone display by showing * characters instead. For security, consider enabling this option.
    Option Description
    No (0) [Default] Entries are not masked on the display.
    Yes (1) Enabled.

2. Should a keyset or DSS Cconsole have an Account Code key?

  1. 2121-[01 to 24]: Feature Key Codes Stations: Config: Feature Keys: Assignment (2121): Function Type]
    - This is an alternative to using the keyset soft keys.
    Option Description
    28 Assign this key code to an available Feature Key
    - [Default] No Account Code keys assigned by default.
  2. 2401-01: DSS Owner [Stations: DSS Consoles: DSS1: Association (2401): DSS Owner]
    - Use the DSS Console if the keyset doesn't have an available key.
    Option Description
    28 Assign this key code to an available DSS Console Key
    - [Default] No Account Code keys assigned by default.