Check Key

Additional Feature Information
Check Key

Checking Feature Key Assignments

To check a Feature Key assignment:

  1. Press CHECK.
  2. Press a Feature Key on your phone or DDS Console.
    1. On your phone, press the key again to check the DSS/BLF assignment.
  3. Do one of the following:
    1. Press another Feature Key to check.
    2. Press SPEAKER to exit the check mode.

Checking Personal Speed Dial Assignments

To check a Personal Speed Dial assignment (keyset only):

  1. Press CHECK.
  2. Press a Personal Speed Dial key, as follows:
    1. Press once for the lower-numbered bin name. For example, pressing key 1 once shows the name for 701.
    2. Press twice for the lower-numbered bin number. For example, pressing key 1 twice shows the number for 701.
    3. Press three times for the higher-numbered bin name. For example, pressing key 1 three times shows the name for 711.
    4. Press four times for the higher-numbered bin number. For example, pressing key 1 four times shows the number for 711.
  3. Do one of the following:
    1. Press another Personal Speed Dial key to check.
    2. Press SPEAKER to exit the check mode.

Using the Check Key to get System Information

To check system information:

  1. Press CHECK.
  2. Follow the chart to check system information.
Check Key System Information
CHECK + Display Description
INTERCOM Extension xxx The telephone's extension number.
Station:xxx The telephone's station port number.
Slot:x Port:x The slot to which the extension is connected, and the port on the card in that slot.
V-MAIL IntraMail Version x.xx The IntraMail prompt set version number.
Ports:x Type:Pro The number of IntraMail ports installed, followed by the IntraMail Type (Pro or Standard).
Lic Code: The 13-character IntraMail license code. If you want to upgrade your IntraMail, you'll need to provide this code.
DND IP:xxx.xxx.xxx.xxx The IP address of the system to which the telephone is connected.
GW:xxx.xxx.xxx.xxx The system's gateway (router) address.
DHCP:xxx The DHCP status: On, Off, or On (Manual IP).
CONF VoIP The VoIP installation status: Installed or Not Installed
Ports: The number of licensed VoIP ports.
Lic Code: The 13-character VoIP license code. If you want to add VoIP ports to the system, you'll need to provide this code.
HOLD DSX-xxx x.xx.xx The system type (40, 80, or 160) and the software level.
Installed The system installation date.
Sys Code: The 13-character system code. If you lose the level 3 system password or otherwise get locked out, you'll need to provide this entry so you can get an unlock code.