Circular Hunting Programming

Additional Feature Information
Extension Hunting
Programming for this Feature
Terminal Hunting Programming
[3.01] UCD Hunting Programming
Extension Hunting Timers

Setting up Circular Hunting

1. Set the hunt type and destination.

  1. 2115-01: Hunt Type Stations: Config: Options: Hunt/Overflow (2115): Hunt Type:
    Assign the hunt type for each extension in the group.
    Option Description
    0 [Default] Disabled.
    1 Ring No Answer Line.
    2 Busy/Ring No Answer Line.
    3 Busy/Ring No Answer All Calls.
    4 Busy Line.
  2. 2115-01: Hunt Destination Stations: Config: Options: Hunt/Overflow (2115): Hunt Master/Destination:
    Each extension should route to the next in the group.
    The last extension should route back to the second. See the Setting Up Circular Hunting for more.
    Option Description
    Digits Extension number.
    None [Default] No entry, entered by pressing CLEAR.

2. Adjust the timers that affect Circular Hunting.

  1. 1603-01: Transfer Recall Timer [System: Timers: Features: Recall (1603): Transfer Recall]
    This timer sets how long the first member of the Circular Hunting Group rings before routing to the next member.
    Option Description
    0 Disabled.
    1-9999 Seconds. [Default] = 20 seconds.
  2. 1601-03: Call Forward No Answer Timer [System: Timers: Features: Incoming (1601): CFWD No Answer]
    This timer sets how long the next and succeeding members of the Circular Hunting Group ring.
    Option Description
    0 Disabled.
    1-9999 Seconds. [Default] = 10 seconds.
  3. 1601-02: DIL No Answer Timer [System: Timers: Features: Incoming (1601): DIL No Answer]
    This timer sets how long a DIL to a Circular Hunting Group member will ring that extension before routing to the next extension in the group.
    Option Description
    0 Disabled.
    1-9999 Seconds. [Default] = 15 seconds.