Programming Single Line Telephones

Additional Feature Information
Single Line Telephones

Setting Single Line Telephone Options

Set the options for single line telephones.

  1. 1403-02: Single Ring for Single Line Set [System: Class of Service: SLTs: SLTs(1403): Single Ring]
    This program allows a single line telephone to follow the ringing pattern of the incoming line.
    Option Description
    No (0) [Default] Disabled.
    Yes (1) Enabled.
  2. 1403-06: Loop Disconnect for Single Line Set [System: Class of Service: SLTs: SLTs(1403): Loop Disconnect]
    Enable this option if the single line telephone requires a loop disconnect signal.
    This option may be required if the single line extension is an answering machine.
    Option Description
    No (0) [Default] Disabled.
    Yes (1) Enabled.
  3. 2102-01: Class of Service [Stations: Config: Setup: Access (2102): Class of Service]
    Assign Class of Service to extensions.
    Option Description


    1-15
                                        


    Class of Service level 1-15.
    [Default] for extension 300 = 1.
    [Default] for all other extensions = 2.