Programming POP3 Authentication

Additional Feature Information
Email Integration
Programming for this Feature
Programming System SMTP Options
Programming the Subscriber Mailbox Email Options
Programming the Department Group Subscriber Mailbox Email Options
Some Common SMTP Settings
Common SMS Portals

Setting Up the POP3 Authentication Options

1. POP3 Authentication setup.

  1. 1105-04: SMTP Authentication [System: Config: Communication: SMTP (1105): Authentication]
    To use POP3 Authentication, be sure this option is set to 2.
    Option Description
    No (0) Disabled.
    Yes (1) [Default] Enabled.
    2 POP3 Authentication enabled.
  2. The following options are active only when POP3 Authentication is enabled.

2. Specify the POP3 server name and port.

  1. 1106-01: POP3 Server Name [System: Config: Communication: POP3 (1106): Server Name]
    Enter the name of the POP3 server that will handle email delivery for the installation site. The POP3 server name is typically similar to pop.emailserver.com.
    Option Description
    Alphanumeric 48 characters maximum. See Name Programming Chart for more.
    [Default] = no entry.
  2. 1106-02: POP3 Port [System: Config: Communication: POP3 (1106): Port]
    Enter the port (logical connection) the installation site’s email server uses for POP3.
    Option Description
    Digits 4 digits max using 0-9. [Default] = 110.

3. Set the POP3 encryption and authentication options.

  1. 1106-03: POP3 Encryption (SSL) Enabled [System: Config: Communication: POP3 (1106): Encryption]
    Use this option to enable or disable POP3 SSL encryption for the site's email server.
    Option Description
    No (0) [Default] Disabled.
    Yes (1) Enabled.
  2. 1106-04: POP3 User ID [System: Config: Communication: POP3 (1106): User Name]
    Enter the POP3 account's user name. If the subscriber’s email address is yourname@emailserver.com, the user name would normally be yourname.
    Option Description
    Alphanumeric 48 characters maximum. See Name Programming Chart for more.
    [Default] = no entry.
  3. 1106-05: POP3 Password [System: Config: Communication: POP3 (1106): Password]
    Enter the password for the account specified in the previous option. This password is required to log onto the email account.
    Option Description
    Alphanumeric 48 characters maximum. See Name Programming Chart for more.
    [Default] = no entry.